MONMOU03.SYS

From EDM2
Jump to: navigation, search

PC-Bus and MicroChannel Touchscreen Controller

DEVICE=\OS2\BOOT\MONMOU03.SYS <parameter>

Parameters

where is:

4035 for the IntelliTouch E281-4035 PC-Bus controller.
4025 for the IntelliTouch E281{A}-4025 PC-Bus controllers.
2201 for the AccuTouch E271-2201 PC-Bus controller.
141 for the AccuTouch E271-141 PC-Bus controller.

matches the jumper settings on the controller.

matches the interrupt jumper on the controller.

NOTE: Disabling the COM Drivers If you selected IRQ4 or IRQ3 for the touchscreen controller (the interrupts reserved for COM1 and COM2), move the DEVICE=COM.SYS and DEVICE=VCOM.SYS commands (if present) before the DEVICE= MONMOU03.SYS command in CONFIG.SYS. This prevents the COM drivers from displaying a message saying the COM port is unavailable. Add the flag (,0,0) to COM.SYS, where is 1 for IRQ4 or 2 for IRQ3.

NOTE: If you do not wish to have a mouse connected, change the "stype=elomou$" flag to "type=elomou$" on the DEVICE=MOUSE.SYS command.

Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No No Yes Yes